A prominent stockiest as well as the trader of the Inconel 625 sheets plates coils, is the Jaiman. This alloy contains nickel content high amount due to which it has excellent resistance towards the alkaline solution. Rotating beam, as well as high strain, LCF test, etc, are performed on this alloy at room temperature during the manufacturing process. Inconel 625 sheet is machinable in hot worked as well as annealed condition.
Inconel DIN 2.4856 Coils, Inconel UNS N06625 Sheets, Inconel Werkstoff Nr. 2.4856 Plates, Inconel UNS N06625 Plates, Inconel Alloy 625 Sheets, Inconel UNS N06625 Coils, Inconel 625 Plates, Inconel 625 Coils, Inconel DIN 2.4856 Sheets, Inconel 625 Plates Supplier in Mumbai, India.
While machining this alloy considerable heat is generated and cast nonferrous high-speed steel and cemented carbide tool is used. Inconel 625 plates manufactured are cold worked below twelve hundred degrees Fahrenheit. The lubricant used in these plates is Sulphur based oil.
ASME SB443 Inconel N06625 Sheets, Inconel JIS NW 6625 Plate, Stockist of Inconel 625 Plates, ASTM B443 Inconel 625 Coils, Alloy 625 Hot Rolled Plates, Inconel GOST НП-2 Sheets Stockist, Inconel 625 Werkstoff No 2.4856 Sheets, Alloy 625 Shim Sheets, Specialist of Inconel 625 Slatting Coils, 625 Inconel Alloy Plate Exporter, 625 Inconel Polished Cold Drawn Plates, Leading Supplier of Inconel 625 Plate Dealer in India.
Table of Content
- About Inconel 625 Sheets, Plates & Coils
- Inconel Alloy 625 Sheets, Plates & Coils Specification
- Inconel Alloy 625 Sheets, Plates & Coils Chemical Composition
- Inconel 625 Sheets, Plates & Coils Mechanical Properties
- Inconel 625 Sheets, Plates & Coils Equivalent Grades
- Industry Application
- People Also Searched for
- Popular Manufacturer 625 Sheets, Plates & Coils
- Inconel Alloy 625 Sheets, Plates & Coils Exporter
- Alloy 625 Sheets, Plates & Coils Suppliers
About Inconel 625 Sheets, Plates & Coils
Alloy 625 sheet had good strength at room temperature and there is no impact seen on its strength even at low temperatures. There is the change in toughness or brittle transition with the change in temperature. Chromium content in this alloy makes it better for commercial purposes. In the reducing environment too this alloy can remain resistant because of its high nickel content.
Available type of the Inconel 625 sheets plates coils are-
Inconel alloy 625 sheets, Inconel alloy N06625 plates, alloy 625 coils, alloy 625 shim sheets, alloy N06625 sheet, Inconel alloy 625 foils, and alloy UNS N06625 flat.
Available forms of Inconel 625 sheets plates’ coils are-
Perforates sheets, chequered plate, rolls, plates, strips, flange, shim sheets, foils
The entire Inconel alloy is graded as Inconel alloy 625/ UNS N06625. One can easily buy this Inconel 625 Sheets Plates coils at affordable prices from different industries present worldwide.
What are Inconel 625 Sheets?
Inconel 625 Sheets are made of a nickel-chromium alloy with high corrosion & heat resistance. Inconel Alloy 625 Sheets are known for their excellent strength & toughness & are often used in high-temperature applications such as furnace components & heat exchangers.
What are the uses of the Inconel 625 plate?
Inconel 625 plates are commonly used in aerospace and chemical processing industries due to their high strength and corrosion resistance. UNS N06625 Plates can also be used in marine and power generation applications, as well as for cryogenic storage tanks, heat exchangers, and pressure vessels.
What are the Characteristics of the Inconel 625 coil?
Inconel 625 coils have a high strength-to-weight ratio, good weldability, and excellent resistance to oxidation, carburization, and corrosion in a wide range of environments. Inconel Alloy 625 Coil also has good fatigue strength and stress-corrosion cracking resistance.
Inconel 625 Sheets, Plates & Coils Specification
Standard :ASTM B168, ASME SB168
Thickness : 0.1mm to 12 mm Thk
Sheet/Plate Size : 1000 mm x 2000 mm, 1220 mm x 2440 mm, 1500 mm x 3000 mm, 2000 mm x 2000 mm, 2000 mm x 4000 mm
Coil Width : 1000mm, 1219mm, 1500mm, 1800mm, 2000mm, 2500mm, 3000mm, 3500mm etc.
Coil Length : 2000mm, 2440mm, 3000mm, 5800mm, 6000mm etc.
Surface : 2B, 2D, BA, NO.1, NO.4, NO.8, 8K, mirror, checkered, embossed, hair line, sandblast, Brush, etching.
Finish : Hot rolled (HR), Cold rolled (CR), 2B, 2D, BA NO(8), SATIN (Met with Plastic Coated), Galvanized etc.
Inconel 625 Sheets, Plates & Coils Chemical Composition
Grade | C | Mn | Si | S | Cu | Fe | Ni |
Inconel 625 | 0.10 max | 0.50 max | 0.5 max | 0.015 max | – | 5.0 max | 58.0 min |
Inconel 625 Sheets, Plates & Coils Mechanical Properties
Element | Density | Melting Point | Tensile Strength | Yield Strength (0.2%Offset) | Elongation |
Inconel 625 | 8.4 g/cm3 | 1350 °C (2460 °F) | Psi – 1,35,000 , MPa – 930 | Psi – 75,000 , MPa – 517 | 42.5 % |
Inconel 625 Sheets, Plates & Coils Equivalent Grades
STANDARD | WERKSTOFF NR. | UNS | JIS | BS | GOST | AFNOR | EN |
Inconel 625 | 2.4856 | N06625 | NCF 625 | NA 21 | ХН75МБТЮ | NC22DNB4MNiCr22Mo9Nb | NiCr23Fe |
Types of Inconel 625 Sheets, Plates & Coils
inconel 625 clad plate, inconel 625 strips, inconel 625 shim stock, inconel 625 rolling sheets, inconel 625 flat sheet, inconel 625 rolling plate, inconel 625 polished plate, inconel 625 quarto plate, inconel 625 precision strip, inconel alloy 625 astm b443 hard tempered cold-rolled plates, inconel uns n06625 hard tempered shim sheet,
inconel 625 structurals sheet plate, inconel alloy 625 corrosion resistant sheets plates coils, inconel alloy 625 hr plates, inconel alloy 625 diamond plate, inconel alloy 625 slotted hole sheets, inconel alloy 625 plate in 20mm, inconel alloy 625 sheet coil in size ranging in 1000mm,
10mm thick inconel alloy 625 circle, inconel alloy 625 embossed sheet, inconel 625 sheet price, inconel 625 sheet suppliers, inconel 625 plates composition, inconel 625 plates properties, inconel 625 plate price in india, inconel 625 sheets astm, ni625 coil

Columbus Stainless Make Inconel 625 Sheets, Plates & Coils

Outokumpu Make Inconel Alloy 625 Sheets, Plates & Coils

North American Make Inconel Alloy 625 Sheets, Plates & Coils

Nippon Yakin Make Inconel 625 Sheets, Plates & Coils

VDM Make Inconel 625 Sheets, Plates & Coils